CGSULIT SC530 Mercedes Benz/Sprinter/Smart OBD2 Scan Tool Diagnostic Scanner with Bi-directional Control

Why select CGSULIT SC530 scan tool for your Mercedes-Benz?

CGSULIT SC530 Mercedes Benz Highlights:Bi-directonal Control & Active Test.

The CGSULIT SC530 scanner allows you to activate or control a vehicle system or component, making the check of electronic components such as switches, sensors, replays & actuators to be a simple task. It also allows you to re-calibrate, adapt or configure certain components after making repairs or replacements. Make sure the components are in good condition to be tested. 

For example, if "Press Brake Pedal" displays, you have to press and hold the brake pedal and then continue. The sequence, number, and type of tests are dictated by the control module.

What are Full-systems that CGSULIT SC530 Benz Diagnostic Tool Can Scan?

1. Drive System: CDI-Motor electronics, VGS-Transmission control, VG-All-wheel drive, Fuel pump, PTCU-Control unit powertrain, SG-EM-Power electronics, BSA-Belt-driven starter/alternator, and more.

2. Chassis System: AMG DRVU-AMG DRIVE UNIT, AIRMATIC-AIRMATIC, 
ES-Electrical power steering and more.

3. Driver assistance system: MFK-Multifunction camera, RFK-Backup camera, SGR- Radar sensors control unit, IRS-HRA-Outer right rear intelligent radar sensor system, IRS-HRA-Outer right rear intelligent radar sensor system, TPM - Tire pressure monitor and more.

4. Body System: SRS-Supplemental restraint system, EZS-Electronic ignition lock, SAM-F-Signal acquisition and actuation module, MSS-Special vehicle multifunction control module, PSD-Control module 'Panoramic sliding roof', HLCM-L-Left headlamp control module, SG-SW-R - Right headlamp, Charger, Steering column module, BMS - Battery management system, AB-Airbag and more.

5. Seat and Doors System: DCU-LF-Left front door, DCU-RF-Right front door, DCM-RL-Door control module rear left, DCM-RR-Door control module rear right front, ESA driver-Electric seat adjustment driver (with memory), ESA-FL-Electric seat adjustment front left, ESA-FR-Electric seat adjustment front right.

CGSULIT SC530 Mercedes Scan Tool Supports 25+ Special Reset Services.

SC530 is for the best mercedes star diagnostic tool for Mercedes owners, enthusiasts, independent repairs, specialized garages, and technicians.

Quick scan performs an automatic system test to determine which control modules are installed on the vehicle and provides a diagnostic trouble codes overview. It does not only include basic functions - read and erase codes, but is also capable of advanced functions - actuation, activation, adaptation, initialization, learn/relearn, adjustment, and coding.

In addition, it allows you to access the most commonly required service features, which usually only be available from Benz dealer-level scanners or much more expensive professional tools. 

• Oil Service Light Reset: Allows you to reset the Oil Life Reminder (turn off the Oil Service Light) when the replacement of engine oil is done in case of the impurities in the oil may damage the engine. 

• Airbag Reset: After diagnosing airbag system errors in the event of a crash or during regular maintenance, it promptly erases fault codes and takes corrective actions to ensure the airbag system functions normally.

• ABS Bleeding: ABS brake bleeding to get a firm brake pad after air exhaustion after repairing the ABS pump system. Allows you to use the scanner temporarily to activate or control the anti-lock brake system or components. 

• Electronic Parking Brake (EPB) Service: Allows you to perform service and maintenance, deactivation and activation of electronic brake control system, bleeding brake fluid, opening and closing brake pads, and setting brakes after disc or pad replacement, on where electronic brake systems are fitted. Diagnoses EPB caliper functionality initializes the wear indicator if new pads are installed, and deactivates or re-activates the brake control system.

• Tire Pressure Monitoring System (TPMS) Reset: Allows you to activate/ relearn/ reset tpms data, but please note tpms programming for your Benz, is not operated via this tool, you need to complete it manually or by TPMS tool.

• Steering Angle Sensor (SAS) Calibration: Allows you to perform calibration of the steering angle sensor, which permanently stores the current steering wheel position as straight-ahead in the sensor EEPROM. After calibrating the sensor successfully, its fault memory will be automatically cleared.

• BRT: Battery Reset. Evaluate the battery charge state, monitor the close-circuit current, register the new battery replacement, and activate the rest state of the vehicle battery system. Clear faults from the dashboard.

• Diesel Particulate Filter Regeneration: This allows you to perform the D-P-F cleaning to clear the blockage through continuous burning of the particulates captured in the diesel particulate filter. When a D-P-F regeneration cycle is completed, the warning light automatically goes off.

• Injector Coding: Write the injector actual code or rewrite code in the ECU to the injector code of the corresponding cylinder to more accurately control or correct cylinder injection quantity. 

• Throttle Service(TBA): Using the throttle position sensors in the throttle body, the ECU learns the full open and full closed positions through various states (idle, part throttle, WOT) known as a Throttle Body Alignment (TBA).

• More special services: Headlamp reset, Clutch adaption, Windows/Door/Proof Reset, Turbo, EVAP test, Transmission Learn, Language change, Gear Learning, A/F Adjust, CVT, Seat Match, Prime Fuel Pump, Change Tire size, Tcm Oil, etc.

Warm Tips: Please note that the supported special functions will vary from specific year and model of the vehicle. Contact us for compatibility check before purchasing.

Q: What if I want to diagnose other brand vehicles? Should I buy another new one?
A: Of cause not. Besides Mercedes Benz, there are B-M-W, Land-Rover, Jaguar, Chrysler, Ford, VAG, GM, Kia, Hyundai, Opel, Vauxhall, and more software for your choice. Just need to add the vehicle software for one more brand.

Data Playback&Printing
Q: Why do I need to print data?
A: If you are unable to determine the problem, you can print out the diagnostic data and send the data to your mechanic for help.

Q: How to print data?

A: Download the “CGSULIT Update Assist” from "www.cgsulit.com"--- Connect the scanner to a computer with a printer--- Enter into "Data Manager", then you can print the data.

Lifetime FREE Update and Easily Done:

Lifetime free updates and a one-year warranty, so you always have the latest bug fixes, newly added information, and functions, and you can also connect to a computer at any time, share data, and even print data.

17+ Multi-Languages Supported: 

English, Spanish, French, German, Italian, Russian, Polish, Japanese, Korean, and more.

Note: About Compatibility

Please notice that the vehicle's special functions & vehicle compatibility will vary in different years & models.

Package List:

* CGSULIT SC530
* Diagnostic Cable
* USB Cable
* User Manual
* Portable Nylon Pouch
* Outer Carton